• Water-resistant and operates using a CR2032 lithium battery (included) that can easily be replaced when needed
• The wireless unit can be placed or attached anywhere to make temperature control safe and convenient
• Remote Dimensions:  2” x 2” x 0.6"

Required For Operation:

• Dual Digital Controller (sold separately)

 

To Pair the Remote:

• Make sure both dials on the wireless remote are in the "off" position

• Push both buttons on the Dual Digital Control for about 5 seconds until it begins to blink

• Once it begins blinking, turn on both dials of the wireless remote

• Within a few seconds the Digital Controller will stop blinking, indicating the remote has connected

 

To Change The Battery:

• Make sure both dials on the wireless remote are in the "off" position

• Carefully peel off the back sticker of the remote to reveal 4 small screws

• Remove those screws to access the CR2032 battery

• After replacing the battery, reattach the back panel and the sticker - You should not have to re-pair the remote to the controller, but if you do, refer to the pairing instructions above 

WARRANTY

All controllers are covered by a 2 year warranty. See the Warranty Info page for details.